100W LED RGB Floodlight - Colour Changing

This is the very latest in low energy high quality outdoor or indoor floodlights. This LED floodlight is an RGB colour changing model providing a range of light colours which can be changed via the included IR remote control. These LED floodlights are also instantly bright with no warm up time just like a standard halogen floodlight.

These RGB colour changing LED floodlights can change to various colours via the IR remote control provided - the remote has a range of 8-12 meters depending on site. (The remote requires a line of sight with the receiver on the floodlight for best operation). 

These 100W LED RGB multi colour changing floodlights are suitable for 110V and 240V applications.

For our full range of low energy LED floodlights please Click Here

Specifications:

Fitting Colour: Silver Grey
Fitting Material: Stainless Steel / Toughened Glass (High Strength Material)
LED Emitter: LED SMD Module (Far Brighter than standard LED)
Dimensions: 380mm (L), 285mm (W), 80mm (H)
Light Colour: RGB Colour Changing (Red, Green, Blue, Orange, Yellow, Purple, off Whites and many more) - All controlled Via the IR remote control.
Voltage: 85-265V (50/60Hz)
Lumens: 8000-9500LM (When all RGB colours are on at max / this will then use 100W).
Beam Angle: 120°
Working Temperature: -25° - 55° C
Power Consumption: 100 Watt Max
Power Factor: >90
IP Rating: IP65 (Waterproof)
Net Weight: 3.6Kg
Average Life: 30,000 Hours
Safety Approved: CE / RoHS

No UV or IR Radiation

These LED floodlights come with 15cm of cable fitted to the fitting.

We strongly advise that any electrical work be carried out by a qualified electrician.

If you require a cable connector to add this floodlight to an existing cable or to lengthen the current cable we recommend the following: Please Click Here.

All our LED flood light range are factory sealed units and as such should not be opened as they do not contain any user replaceable components. Any attempt to open the units will void the warranty / guarantee.

NOTE – To comply with regulations, installation must be carried out by a suitably qualified competent person and in accordance with the current IEE Wiring Regulations (BS7671) and Building Regulations. A copy of the instructions must be left for the user/maintenance engineer for future reference.