10W Premium LED Motion Sensor Floodlight - Natural 4000K (Black Case)
Click to enlarge
10W Premium LED Motion Sensor PIR Floodlight / Security Light - Natural 4000K Light
This is the very latest in low energy high quality outdoor motion sensor floodlights. This LED floodlight gives a bright natural (840 / 4000K) light. These LED floodlights are also instantly bright with no warm up time just like a standard halogen floodlight.
Motion sensor with 120 degree detection angle, range max. 8m, response time of 9 seconds to 10 minutes adjustable dimmer switch from light to dark.
- Available in White , Warm White and RGB Light output option
- Premium Quality Aluminium Alloy body
- Corrosion Resistant
- Built in Power supply, No external ballast required
- PIR Sensor Movement Detector – Optional
- Widely used for Lighting Driveways, Gardens & Buildings, Commercial BillBoards & Hoardings, Plazas, Sports Grounds & Parking Lots
For our full range of low energy LED floodlights please Click Here
Fitting Colour: Black
Fitting Material: Diecast Aluminium / Toughened Glass (High Strengh Material)
LED Emitter: SMD Module (Far Brighter than standard LED)
Dimensions: 178mm (L), 113mm (W), 27mm (H)
Light Colour: Natural White (4000K / 840)
Beam Angle: 120°
Working Temperature: -20° - 50° C
Power Consumption: 10 Watt
Power Factor: >90
IP Rating: IP65 (Weatherproof)
Net Weight: 0.5Kg
Average Life: 30,000 Hours
Safety Approved: CE / RoHS
Guarantee: 2 Year Manufactures Guarantee
Product Code: VT-4911 / 5784
No UV or IR Radiation
These VT-4911 / 5784 LED floodlights come with 30cm of cable fitted to the fitting.
These flood lights come with a 2 year guarantee
We strongly advise that any electrical work be carried out by a qualified electrician.
If you require a cable connector to add this floodlight to an existing cable or to lengthen the current cable we recommend the following: Please Click Here.
All our LED flood light range are factory sealed units and as such should not be opened as they do not contain any user replaceable components. Any attempt to open the units will void the warranty / guarantee and cause the units to fail early.
NOTE – To comply with regulations, installation must be carried out by a suitably qualified competent person and in accordance with the current IEE Wiring Regulations (BS7671) and Building Regulations. A copy of the instructions must be left for the user/maintenance engineer for future reference.
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: