50W (500W Equiv) LED Floodlight with PIR - Daylight
Click to enlarge
50W (500W Equiv) LED Floodlight / Security Light - Daylight White Light - With PIR Motion Sensor
This is the very latest in low energy high quality budget outdoor floodlights (IP65). This LED floodlight gives a bright daylight (Pure White) light with PIR motion sensor. These LED floodlights are IP65 rated and are also instantly bright with no warm up time just like a standard halogen floodlight.
The PIR motion sensor can be adjusted through 180 degrees left and right and 120 degrees vertically. The movement sensor has 3 adjustment settings to vary the sensitivity to movement distance, illumination time and the light level required to turn on and off.
Motion sensor with 120 degree detection angle, range max. 12m, response time of 9 seconds to 10 minutes adjustable dimmer switch from light to dark.
These 50W LED floodlights are suitable for 110V and 240V applications.
For our full range of low energy LED floodlights please Click Here
These floodlights will be shipped via 24 hour delivery (Next Day Delivery) if ordered before 3:30pm
Fitting Colour: Silver Grey
Fitting Material: Aluminium Alloy / Toughened Glass (High Strengh Material)
LED Emitter: Circular LED SMD Module
Dimensions: 225mm (L), 185mm (W), 100mm (H)
Light Colour: Daylight White / Cool White (6000K-6500K)
Beam Angle: 120°
Working Temperature: -20° to 50° C
Power Consumption: 50 Watt
Power Factor: >90
IP Rating: IP65 (Waterproof)
Average Life: 30,000 Hours
Cable Lenght: 150mm / 15cm
Safety Approved: CE / RoHS
No UV or IR Radiation
These 50W LED floodlights come with 15cm of cable fitted to the fitting.
We strongly advise that any electrical work be carried out by a qualified electrician, incorrectly fitted floodlights can fail early and are not covered by any guarantee.
If you require a cable connector to add this floodlight to an existing cable or to lengthen the current cable we recommend the following which is not currently sold by us: Please Click Here.
All our LED flood light range are factory sealed units and as such should not be opened as they do not contain any user replaceable components. Any attempt to open the units will void the warranty / guarantee.
After these floodlights have been fitted it is worth checking that the installer has install this with the PIR and the 3 PIR dials facing the ground and not up, if they are facing up the unit will fail early as water will be able to access the PIR, this is the same with all PIR floodlights.
If you have a floodlight where the PIR / Motion Sensor does not appear to work, please reset the unit by turning the floodlight off for 10 minutes and then turning on again, this should reset the PIR / Motion sensor and fix any issue.
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: